для Cisco Cisco Packet Data Gateway (PDG)
radius authenticator-validation
This command enables/disables the MD5 authentication of RADIUS user. MD5 authentication is enabled by
default.
default.
Product
All
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > AAA Server Group Configuration
configure > context context_name > aaa group group_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-aaa-group)#
Syntax Description
[ default | no ] radius authenticator-validation
no
Disables MD5 authentication validation for an Access-Request message to the AAA server.
Usage Guidelines
Use this command to disable or re-enable, sending Access-Request messages to the AAA server for MD5
validation.
validation.
Examples
The following command disables MD5 authentication validation for Access-Request messages for user names
(NAI):
no radius authenticator-validation
(NAI):
no radius authenticator-validation
The following command enables MD5 authentication validation for Access-Request messages for user names
(NAI):
radius authenticator-validation
(NAI):
radius authenticator-validation
Command Line Interface Reference, Modes A - B, StarOS Release 19
86
AAA Server Group Configuration Mode Commands
radius authenticator-validation