для Cisco Cisco Packet Data Gateway (PDG)
timeout bearer-inactivity
Supports a bearer inactivity timeout for GBR and non-GBR S-GW bearer type sessions.
Product
S-GW
SAEGW
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > APN Profile Configuration
configure > apn-profile profile_name
Entering the above command sequence results in the following prompt:
[local]
host_name
(apn-profile-
profile_name
)#
Syntax Description
[ remove ] timeout bearer-inactivity [ gbr | non-gbr ] dur_seconds volume-threshold { total bytes | uplink
bytes | downlink bytes} | exclude-default-bearer
remove
Removes the timeout bearer-inactivity setting.
timeout
Specifies that a session time out value will be configured for this APN profile.
bearer-inactivity
Specifies that a session time out value will be configured for this APN profile.
gbr dur_seconds
Specifies that the system will check for low activity on a GBR bearer. dur_seconds specifies the bearer
inactivity timer in seconds. Valid entries are from 900 to 2592000 seconds (15 minutes to 720 hours).
inactivity timer in seconds. Valid entries are from 900 to 2592000 seconds (15 minutes to 720 hours).
non-gbr dur_seconds
Specifies that the system will check for low activity on a non-GBR bearer. dur_seconds specifies the bearer
inactivity timer in seconds. Valid entries are from 900 to 2592000 seconds (15 minutes to 720 hours).
inactivity timer in seconds. Valid entries are from 900 to 2592000 seconds (15 minutes to 720 hours).
Command Line Interface Reference, Modes A - B, StarOS Release 19
1514
APN Profile Configuration Mode
timeout bearer-inactivity