для Cisco Cisco Packet Data Gateway (PDG)
slow-timers
Specifies the asynchronous mode control packet interval when Echo mode is enabled. In BFD asynchronous
mode, BFD-enabled peers periodically send BFD Control packets to one another. If a number of those packets
in a row are not received within the specified interval by the other peer, the session is declared to be down.
mode, BFD-enabled peers periodically send BFD Control packets to one another. If a number of those packets
in a row are not received within the specified interval by the other peer, the session is declared to be down.
Product
All
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > BFD Configuration
configure > context context_name > bfd-protocol
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-bfd)#
Syntax Description
slow-timers timer_value
no slow-timers
no slow-timers
no
Disables previously specified BFD slow timers.
timer_value
Specifies the BFD control packet interval (in milliseconds) for Echo mode as an integer from 1000 through
300000. Default: 2000
300000. Default: 2000
Usage Guidelines
Use this command to configure the interval between BFD control packets sent between peers in Echo mode.
Examples
The following example command configures an asynchronous mode control packet interval of 10000ms (10
seconds):
slow-timers 10000
seconds):
slow-timers 10000
Command Line Interface Reference, Modes A - B, StarOS Release 19
1833
BFD Configuration Mode Commands
slow-timers