для Cisco Cisco Packet Data Gateway (PDG)
gmb user-data
This command configures the parameters in this BMSC profile for user data for MBMS user service.
Product
GGSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > BMSC Profile Configuration
configure > context context_name > bmsc-profile profile_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-bmsc-profile)#
Syntax Description
gmb user-data { mode-preference { multicast | unicast } | unicast-self-address self_ip_address }
default gmb user-data mode-preference
no gmb user-data unicast-self-address
default gmb user-data mode-preference
no gmb user-data unicast-self-address
no
Removes the configured self address of GGSN for unicast in the BMSC profile for user data of MBMS user
service.
service.
defualt
Sets the user data mode to unicast in the BMSC profile for user data of MBMS user service.
mode-preference { multicast | unicast }
Default: unicast
Specifies the preferred mode of GGSN for receiving MBMS user service data.
multicast: specifies the preferred mode as multicast for MBMS user service.
Note that this multicast keyword is not supported in this release.
Important
unicast: specifies the preferred mode as unicast for MBMS user service.
Command Line Interface Reference, Modes A - B, StarOS Release 19
1922
BMSC Profile Configuration Mode Commands
gmb user-data