для Cisco Cisco Packet Data Gateway (PDG)
edr suppress-zero-byte-records
This command disables/enables the creation of EDRs when there is no data for the flows.
Product
ACS
Privilege
Security Administrator, Administrator
Command Modes
Exec > ACS Configuration > Rulebase Configuration
active-charging service service_name > rulebase rulebase_name
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-rule-base)#
Syntax Description
[ default | no ] edr suppress-zero-byte-records
default
Configures this command with its default setting.
Default: Disabled; same as no edr suppress-zero-byte-records
no
Disables the suppression of zero-byte EDRs.
edr suppress-zero-byte-records
Suppresses zero-byte EDRs.
Usage Guidelines
Use this command to disable/enable the creation of EDRs that are empty. The situation where there is a
zero-byte EDR would typically be possible when two successive EDRs are generated for a flow. This CLI
command suppresses the second such EDR for the flow.
zero-byte EDR would typically be possible when two successive EDRs are generated for a flow. This CLI
command suppresses the second such EDR for the flow.
Command Line Interface Reference, Modes A - B, StarOS Release 19
631
ACS Rulebase Configuration Mode Commands
edr suppress-zero-byte-records