для Cisco Cisco Packet Data Gateway (PDG)
check-imei
Configures the action the SGSN will take if the route towards the Equipment Identity Register (EIR) is down.
Product
SGSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > GPRS Service Configuration
configure > context context_name > gprs-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-gprs-service)#
Syntax Description
check-imei { gf-failure-action | gf-timeout-action } { continue | reject }
default check-imei { gf-failure-action | gf-timeout-action }
default check-imei { gf-failure-action | gf-timeout-action }
default
Resets the default function to reject the Attach.
gf-failure-action
Coupled with either continue or reject, this keyword instructs the SGSN to take action if a valid EIR
configuration exists under the MAP service and if the EIR is temporarily unreachable due to associated
DPC/SSN inaccessible/out-of-service.
configuration exists under the MAP service and if the EIR is temporarily unreachable due to associated
DPC/SSN inaccessible/out-of-service.
gf-timeout-action
Coupled with either continue or reject, this keyword instructs the SGSN to take action if a valid EIR
configuration exists under the MAP service and the route to the EIR is available, but no response is received
from the EIR.
configuration exists under the MAP service and the route to the EIR is available, but no response is received
from the EIR.
continue
Instructs the SGSN to continue the Attach process.
reject
Instructs the SGSN to reject the Attach process.
Command Line Interface Reference, Modes G - H, StarOS Release 19
979
GPRS Service Configuration Mode Commands
check-imei