для Cisco Cisco Packet Data Gateway (PDG)
plmn
This command identifies the Public Land Mobile Network (PLMN) for the GPRS service. It also configures
the common PLMN-Id and an optional list of dedicated PLMN-Ids in support of Multi-Operator Core Network
(MOCN) operation.
the common PLMN-Id and an optional list of dedicated PLMN-Ids in support of Multi-Operator Core Network
(MOCN) operation.
Product
SGSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > GPRS Service Configuration
configure > context context_name > gprs-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-gprs-service)#
Syntax Description
plmn id mcc mcc_num mnc mnc_num [ network-sharing common-plmn mcc mcc_num mnc mnc_num [
plmn-list mcc mcc_num mnc mnc_num [ mcc mcc_num mnc mnc_num ] + ] ]
no plmn id
plmn-list mcc mcc_num mnc mnc_num [ mcc mcc_num mnc mnc_num ] + ] ]
no plmn id
no
Removes the PLMN information from the configuration for the current SGSN service.
mcc mcc_num
Defines the mobile country code (MCC) portion of the PLMN Id.
mnc_num must be a 3-digit integer from 100 to 999. MCC values of 000-099 are Reserved codes.
mnc mnc_num
Defines the mobile network code (MNC) portion of the PLMN Id.
mnc_num must be a 2- or 3-digit integer from 00 to 999. MNC value of 000 is reserved.
network-sharing common-plmn
Configures the common PLMN-Id broadcast by a radio network. An MS that does not support network sharing
will only see this PLMN-Id. An MS that supports network sharing (MOCN) will see this PLMN-Id and the
list of PLMN-Ids configured using the plmn-id keyword.
will only see this PLMN-Id. An MS that supports network sharing (MOCN) will see this PLMN-Id and the
list of PLMN-Ids configured using the plmn-id keyword.
Command Line Interface Reference, Modes G - H, StarOS Release 19
1011
GPRS Service Configuration Mode Commands
plmn