для Cisco Cisco Packet Data Gateway (PDG)
mrru
Specifies the size of the largest reconstructed reception unit that the decompressor is expected to reassemble
from segments. The size includes the CRC. If maximum received reconstructed unit (MRRU) is negotiated
to be 0, no segment headers are allowed on the channel.
from segments. The size includes the CRC. If maximum received reconstructed unit (MRRU) is negotiated
to be 0, no segment headers are allowed on the channel.
Product
HSGW
Privilege
Administrator
Command Modes
Exec > Global Configuration > Context Configuration > HSGW Service Configuration > HSGW Service
RoHC Configuration
RoHC Configuration
configure > context context_name > hsgw-service service_name > ip header-compression rohc
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-ip-header-compression-rohc)#
Syntax Description
mrru num_octets
default mrru
default mrru
default
Resets the value of this command to its default setting of 0.
num_octets
Specifies the number of allowed octets for the MRRU as an integer from 0 through 65535. Default: 0
Usage Guidelines
Use this command to set the size, in octets, of the largest reconstructed reception unit that the decompressor
is expected to reassemble from segments.
is expected to reassemble from segments.
Examples
The following command sets the largest reconstructed reception unit to 1024 octets:
mrru 1024
mrru 1024
The following command resets the MRRU size to its default of 0 octets:
default mrru
default mrru
Command Line Interface Reference, Modes G - H, StarOS Release 19
1578
HSGW Service RoHC Configuration Mode Commands
mrru