для Cisco Cisco Packet Data Gateway (PDG)
failure-handling-template
This command allows the user to create/modify/delete a Diameter failure handling template at the global
configuration level. This command specifies the name of failure handling template and enters the Failure
Handling Template mode. The users can define the failure handling configurations within this template.
configuration level. This command specifies the name of failure handling template and enters the Failure
Handling Template mode. The users can define the failure handling configurations within this template.
A maximum of 64 templates can be configured on the system.
Important
Product
GGSN
HA
HSGW
IPSG
PDSN
P-GW
SAEGW
S-GW
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]
host_name
(config)#
Syntax Description
failure-handling-template name [ -noconfirm ]
no failure-handling-template name
no failure-handling-template name
no
Removes the specified failure handling template from the Global Configuration.
name
Specifies the name of the failure handling template as an alphanumeric string of 1 through 63 characters.
Command Line Interface Reference, Modes G - H, StarOS Release 19
220
Global Configuration Mode Commands (A-K)
failure-handling-template