для Cisco Cisco Packet Data Gateway (PDG)
snmp authentication-failure-trap
Enables or disables the SNMP traps for authentication failures.
Product
All
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]
host_name
(config)#
Syntax Description
[ no ] snmp authentication-failure-trap
no
Disables SNMP traps for authentication failures. When omitted, SNMP traps for authentication failures will
be generated.
be generated.
Usage Guidelines
Disables authentication failure traps if they are not of interest. At this time the option may be changed to
support trouble shooting.
support trouble shooting.
By default SNMP authentication failure traps are disabled.
Examples
The following command enables SNMP authentication failure traps:
snmp authentication-failure-trap
snmp authentication-failure-trap
Command Line Interface Reference, Modes G - H, StarOS Release 19
367
Global Configuration Mode Commands (L-S)
snmp authentication-failure-trap