для Cisco Cisco Packet Data Gateway (PDG)
terminal
Configures the Console port on the ASR 5000 SPIO card. This command is not supported on the ASR 5500.
Product
All
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]
host_name
(config)#
Syntax Description
terminal [ carrierdetect { off | on } | databits { 7 | 8 } | flowcontrol { hardware { off | on } | none } | parity
{ even | none | odd } | speed { 115200 | 19200 | 38400 | 57600 | 9600 } | stopbits { 1 | 2 } ]
carrierdetect { off | on }
Specifies whether or not the console port is to use Data Carrier Detect (DCD) when connecting to a terminal.
Default: off
off: Do not use DCD.
on: Use DCD.
databits { 7 | 8 }
Specifies the number of data bits used to transmit and receive characters.
Default: 8
7: Use 7 databits to transmit and receive characters.
8: Use 8 databits to transmit and receive characters.
flowcontrol { hardware { off | on } | none }
Specifies how the flow of data is controlled between the SPIO and a terminal.
Default: none
hardware: Enables or disables the use of hardware-based flow control
off: Disables the use of Ready to Send (RTS) and Clear to Send (CTS).
on: Enables the use of Ready to Send (RTS) and Clear to Send (CTS).
Command Line Interface Reference, Modes G - H, StarOS Release 19
429
Global Configuration Mode Commands (T-threshold phspc)
terminal