для Cisco Cisco Packet Data Gateway (PDG)

threshold asnpc-idle-mode-timeout

Configures alarm or alert thresholds for ASNPC Instant Messenger idle mode timeouts.

Product

ASN-GW

Privilege

Security Administrator, Administrator

Command Modes

Exec > Global Configuration

configure

Entering the above command sequence results in the following prompt:

[local]

host_name

(config)#

Syntax Description

threshold asnpc-idle-mode-timeout high_thresh [ clear low_thresh ]

high_thresh

Default: 0

Specifies the high threshold number of ASNPC idle mode timeouts that must be met or exceeded within the
polling interval to generate an alert or alarm.

high_thresh is an integer from 0 through 10000000. A value of 0 disables the threshold.

clear low_thresh

Default: 0

Specifies the low threshold number of ASNPC idle mode timeouts during session that maintains a previously
generated alarm condition. If the number of session timeouts falls beneath the low threshold within the polling
interval, a clear alarm will be generated.

low_thresh is an integer from 0 through 10000000. A value of 0 disables the threshold.

This value is ignored for the Alert model. In addition, if this value is not configured for the Alarm model,
the system assumes it is identical to the high threshold.

Important

Usage Guidelines

Set the maximum number of idle mode timeouts allowed in the ASNPC service.

Alerts or alarms are triggered for session timeouts based on the following rules:

Command Line Interface Reference, Modes G - H, StarOS Release 19

463

Global Configuration Mode Commands (T-threshold phspc)

threshold asnpc-idle-mode-timeout