для Cisco Cisco Packet Data Gateway (PDG)
threshold nat-pkt-drop
Configures alarm or alert thresholds for the percentage of Network Address Translation (NAT) packet drops.
Product
NAT
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]
host_name
(config)#
Syntax Description
threshold nat-pkt-drop high_thresh [ clear low_thresh ]
default threshold nat-pkt-drop
default threshold nat-pkt-drop
default
Configures this command with the default threshold settings.
Default: 0—disabled
high_thresh
Specifies the high NAT packet drop percentage threshold that must be met or exceeded within the polling
interval to generate an alert or alarm.
interval to generate an alert or alarm.
high_thresh must be an integer from 0 through 100. A value of 0 disables the threshold.
Default: 0
clear low_thresh
Specifies the low NAT packet drop percentage threshold that must be met within the polling interval for a
clear alarm to be generated.
clear alarm to be generated.
low_thresh must be an integer from 0 through 100. A value of 0 disables the threshold. If not set, the high_thresh
will be the high and low threshold setting.
will be the high and low threshold setting.
Default: 0
Usage Guidelines
Use this command to configure the NAT packet drop threshold settings.
Command Line Interface Reference, Modes G - H, StarOS Release 19
552
Global Configuration Mode Commands (T-threshold phspc)
threshold nat-pkt-drop