для Cisco Cisco Packet Data Gateway (PDG)

Скачать
Страница из 1952
egtp
Configures the type of PLMN sent in either the user location information (ULI) IE or the Serving Network
IE.
Product
SGSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-call-control-profile-
profile_name
)#
Syntax Description
egtp network-sharing-plmn { serving-network { use-common-plmn | use-selected-plmn | use-ue-plmn
} | uli { use-common-plmn | use-selected-plmn | use-ue-plmn } }
remove egtp network-sharing-plmn { serving-network | uli }
remove
Erases the IE choice from the callcontrol profile configuration.
use-common-plmn
Instructs the SGSN to identify the Common PLMN for the shared network.
use-selected-plmn
Instructs the SGSN to identify the Selected PLMN for the shared network.
use-ue-plmn
Instructs the SGSN to identify the UE selected PLMN that is available in the shared network.
Usage Guidelines
The SGSN supports location change reporting on the S4 interface, when requested by the P-GW, using a ULI
IE in GTPv2 messages. When the network sharing feature is enabled the operator can determine which PLMN
to send to the P-GWin the ULI IE and Serving Network IE. The command can be issued multiple times to
configure the PLMN type for each IE.
The selections made for this configuration must match those configured for the call control profile's GTP
configuration.
   Command Line Interface Reference, Modes C - D, StarOS Release 19
72
Call Control Profile Configuration Mode
egtp