для Cisco Cisco Packet Data Gateway (PDG)
access-type
Specifies the access types for IMS core.
Product
SCM (P-CSCF, A-BG)
Privilege
Administrator
Command Modes
Exec > Global Configuration > Context Configuration > CSCF Service Configuration
configure > context context_name > cscf service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-cscf-service)#
Syntax Description
access-type { type } access-profile { default | name access_profile_name } | ue-ip-address-range name
ue_ip_name { address ip_address_mask | range start_ip_address end_ip_address }
no access-type { type } [ access-profile | ue-ip-address-range [ name ue_ip_name ] ]
ue_ip_name { address ip_address_mask | range start_ip_address end_ip_address }
no access-type { type } [ access-profile | ue-ip-address-range [ name ue_ip_name ] ]
no
Removes the specified access type from a CSCF access profile or UE IP address/range.
access-type { type }
3gpp-e-utran-fdd: 3GPP Access Type
3gpp-e-utran-tdd: 3GPP Access Type
3gpp-geran: 3GPP Access Type
3gpp-utran-fdd: 3GPP Access Type
3gpp-utran-tdd: 3GPP Access type
3gpp2-1x: 3GPP2 Access Type
3gpp2-1x-hrpd: 3GPP2 Access Type
3gpp2-cdma-cs: 3GPP2-CDMA-CS
3gpp2-umb: 3GPP2-UMB
adsl: FixedLine Access Type
adsl2: FixedLine Access Type
adsl2p: FixedLine Access Type ADSL2+
Command Line Interface Reference, Modes C - D, StarOS Release 19
1519
CSCF Service Configuration Mode Commands
access-type