для Cisco Cisco Packet Data Gateway (PDG)
tas-service
Identifies the name of the service configured on the system performing Telephony Application Server (TAS)
functions.
functions.
Product
SCM (S-CSCF, SIP Proxy)
Privilege
Administrator
Command Modes
Exec > Global Configuration > Context Configuration > CSCF Service Configuration > SIP Proxy Configuration
configure > context context_name > cscf service service_name > rfc3261-proxy
Entering the above command sequences results in the following prompt:
[
context_name
]
host_name
(config-cscf-service-rfc3261-proxy)#
Syntax Description
tas-service name
[ default | no ] tas-service
[ default | no ] tas-service
default | no
Removes the TAS name from the SIP Proxy configuration.
name
Specifies the name of the service configured on the system performing TAS functions. name must be from 1
to 63 alpha and/or numeric characters and be an existing service.
to 63 alpha and/or numeric characters and be an existing service.
Usage Guidelines
Use this command to identify the name of the service configured on the system performing TAS functions.
The ims-sh-service commands are defined in the Context Configuration Mode Commands chapter in this
guide.
guide.
Examples
The following command identifies the TAS service name as scscf3:
tas-service scscf3
tas-service scscf3
Command Line Interface Reference, Modes C - D, StarOS Release 19
1678
CSCF SIP Proxy Configuration Mode Commands
tas-service