для Cisco Cisco Packet Data Gateway (PDG)
rlf-template
This command configures the RLF template to be used for the Diameter endpoint for throttling and rate control.
RLF template cannot be deleted if it is bound to any application (peers/endpoints).
Important
Product
GGSN
P-GW
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > Diameter Endpoint Configuration
configure > context context_name > diameter endpoint endpoint_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-ctx-diameter)#
Syntax Description
[ no ] rlf-template rlf_template_name
no
Remove the specified RLF template from global configuration.
Do not use "no rlf-template rlf_template_name" in endpoint configuration mode. This CLI attempts to
delete the specified RLF template. This CLI is part of global configuration, and not endpoint configuration.
delete the specified RLF template. This CLI is part of global configuration, and not endpoint configuration.
Important
rlf_template_name
The name of the RLF template to be used for Diameter endpoint configuration. rlf_template_name must be
an alphanumeric string of 1 through 127 characters.
an alphanumeric string of 1 through 127 characters.
Usage Guidelines
Use this command to configure the RLF Template to be used for the Diameter endpoint for throttling and rate
control. This CLI command should be defined in the Diameter endpoint application to enable RLF module.
control. This CLI command should be defined in the Diameter endpoint application to enable RLF module.
Command Line Interface Reference, Modes C - D, StarOS Release 19
1848
Diameter Endpoint Configuration Mode Commands
rlf-template