для Cisco Cisco Packet Data Gateway (PDG)
redundant with
Enables side-by-side (SBS) redundancy for XGLCs. (ASR 5000 only)
Product
All
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Card Configuration
configure > card card_number
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-card-
slot_number
)#
Syntax Description
redundant with card_number
card_number
Identifies the neighboring top slot number of the card to pair with the XGLC being configured. card_number
is an integer between 1 and 48.
is an integer between 1 and 48.
Attempting to use this command with any card other than an XGLC takes the card offline.
Important
Usage Guidelines
Use this command during configuration to identify the slot holding the XGLC card that will be used to provide
redundancy to the XGLC you are configuring. Entering this command enables SBS redundancy when the two
XGLCs occupy two upper (top) slots in a chassis.
redundancy to the XGLC you are configuring. Entering this command enables SBS redundancy when the two
XGLCs occupy two upper (top) slots in a chassis.
Examples
Pair the card in slot 30 with the card being configured:
redundant with 30
redundant with 30
Command Line Interface Reference, Modes C - D, StarOS Release 19
321
Card Configuration Mode Commands
redundant with