для Cisco Cisco Packet Data Gateway (PDG)
Usage Guidelines
Use this command to create and enable the ASN paging controller services in the system to provide functionality
of an ASN Paging Controller service within a context. Additionally this command provides the access to the
ASN Paging Controller Service Configuration mode and also used to remove previously configured ASN
Paging Controller services.
of an ASN Paging Controller service within a context. Additionally this command provides the access to the
ASN Paging Controller Service Configuration mode and also used to remove previously configured ASN
Paging Controller services.
A maximum of 256 services (regardless of type) can be configured per system.
Large numbers of services greatly increase the complexity of management and may impact overall system
performance (i.e. resulting from such things as system handoffs). Therefore, it is recommended that a
large number of services only be configured if your application absolutely requires it. Please contact your
local service representative for more information.
performance (i.e. resulting from such things as system handoffs). Therefore, it is recommended that a
large number of services only be configured if your application absolutely requires it. Please contact your
local service representative for more information.
Caution
Refer to the ASN Paging Controller Service Configuration Mode Commands chapter of this reference for
additional information.
additional information.
Examples
The following command creates an ASN paging controller service name asnpc_1:
asnpc-service asnpc_1
asnpc-service asnpc_1
Command Line Interface Reference, Modes C - D, StarOS Release 19
496
Context Configuration Mode Commands A-D
asnpc-service