для Cisco Cisco Packet Data Gateway (PDG)
attach access-type
Defines attach-related configuration parameters for this call control profile based on the access-type (GPRS,
UMTS, or both) and location area list.
UMTS, or both) and location area list.
SGSN only: Before using this command, ensure that the appropriate location area code (LAC) information
has been defined via the location-area-list command.
has been defined via the location-area-list command.
Important
Product
MME
SGSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-call-control-profile-
profile_name
)#
Syntax Description
attach access-type { gprs | umts } { all | location-area-list instance list_id } { failure-code code |
user-device-release { before-r99 failure code code | r99-or-later failure code code } }
default attach access-type { eps | gprs | umts } { all | location-area-list instance list_id } { failure-code |
user-device-release { before-r99 failure code | r99-or-later failure code }
user-device-release { before-r99 failure code code | r99-or-later failure code code } }
default attach access-type { eps | gprs | umts } { all | location-area-list instance list_id } { failure-code |
user-device-release { before-r99 failure code | r99-or-later failure code }
default
Restores the default values for the for the specified parameter.
access-type type
Defines the type of access to be allowed or restricted.
• gprs
• umts
Command Line Interface Reference, Modes C - D, StarOS Release 19
22
Call Control Profile Configuration Mode
attach access-type