для Cisco Cisco Packet Data Gateway (PDG)
gtpp storage-server timeout
Configures the amount of time that must pass with no response before the system re-attempts to communicate
with the GTPP back-up storage server.
with the GTPP back-up storage server.
Product
GGSN
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-ctx)#
Syntax Description
gtpp storage-server timeout duration
default gtpp storage-server timeout
default gtpp storage-server timeout
default
Configures this command with the default setting.
Default: 30 seconds
duration
Specifies the maximum amount of time (in seconds) the system waits for a response from the GTPP back-up
storage server before assuming the packet is lost. duration is an integer from 30 through 120.
storage server before assuming the packet is lost. duration is an integer from 30 through 120.
Usage Guidelines
This command works in conjunction with the gtpp storage-server max-retries command to establish a limit
on the number of times that communication with a GTPP back-up storage server is attempted before a failure
is logged. This parameter specifies the time between retries.
on the number of times that communication with a GTPP back-up storage server is attempted before a failure
is logged. This parameter specifies the time between retries.
Examples
The following command configures a retry timeout of 60 seconds:
gtpp storage-server timeout 60
Command Line Interface Reference, Modes C - D, StarOS Release 19
650
Context Configuration Mode Commands E-H
gtpp storage-server timeout