для Cisco Cisco Packet Data Gateway (PDG)
mpls bgp forwarding
Globally enables Multi protocol Label Switching (MPLS) Border Gateway Protocol (BGP) forwarding.
Product
All
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-ctx)#
Syntax Description
[ no ] mpls bgp forwarding
no
Disables MPLS BGP forwarding.
Usage Guidelines
Use this command to globally enable the MPLS BGP forwarding. By enabling this command, the BGP VPNv4
routes need not have an underlying LSP to forward the IP packets. If this command is not enabled, then the
nexthop for the BGP routes must be reachable via LDP.
routes need not have an underlying LSP to forward the IP packets. If this command is not enabled, then the
nexthop for the BGP routes must be reachable via LDP.
This command should always be enabled when nexhtop is not reachable thorough LSP.
Caution
Examples
The following command enables the MPLS BGP forwarding on the system:
mpls bgp forwarding
mpls bgp forwarding
Command Line Interface Reference, Modes C - D, StarOS Release 19
804
Context Configuration Mode Commands I-M
mpls bgp forwarding