для Cisco Cisco Packet Data Gateway (PDG)
check-zone-code
Enables or disables the zone code checking mechanism.
Product
SGSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-call-control-profile-
profile_name
)#
Syntax Description
[ no | remove ] check-zone-code
no
Included with the command, this keyword disables the mechanism.
remove
Included with the command, this keyword causes the removal of the current check-zone-code configuration
and returns to the SGSN to the default where zone-code checking is enabled.
and returns to the SGSN to the default where zone-code checking is enabled.
Usage Guidelines
Use this command to enable/disable the zone-code checking function.
Examples
Disable checking of the zone code:
no check-zone-code
no check-zone-code
Command Line Interface Reference, Modes C - D, StarOS Release 19
55
Call Control Profile Configuration Mode
check-zone-code