для Cisco Cisco Tunnel Terminating Gateway (TTG)
monitor-response-timer seconds
Default: 180
Specifies the interval that the CSCF will wait for responses from the peer server.
seconds must be an integer from 1 to 65535.
response-code { positive SIP_response_code | negative SIP_response_code }
Specifies the Options Message response codes.
negative: Negative response codes. SIP_response_code must be an integer from 300 to 699.
positive: Positive response codes. SIP_response_code must be an integer from 200 to 299.
timer mark-out-of-service seconds
Default: 864000
Timer to mark server out-of-service from unavailable state.
seconds must be an integer from 0 to 2147483646.
timer unavailable-monitor-interval seconds
Periodic monitor interval to be used when server is marked as unavailable.
seconds must be an integer from 0 to 2147483646.
timer unavailable-notification seconds
Default: 180
Time after which to send notification to operations administrator.
seconds must be an integer from 0 to 2147483646.
no monitor-status { monitor | response-code [ negative | positive ] [ SIP_response_code ] }
Disables peering server status monitoring.
Usage Guidelines
Use this command to set parameters for monitoring the status of a peer server.
Examples
The following command sets the monitoring interval to three minutes (180 seconds) and the response timer
to six minutes (360 seconds):
monitor-status monitor-interval 180 monitor-response-timer 360
to six minutes (360 seconds):
monitor-status monitor-interval 180 monitor-response-timer 360
Command Line Interface Reference, Modes C - D, StarOS Release 19
1431
CSCF Peer Server Monitoring Configuration Mode Commands
monitor-status