для Cisco Cisco Tunnel Terminating Gateway (TTG)
service-type
Configures the type of service that the CLC or CLC2 line card will support. (ASR 5000 only)
Supported in software releases 8.1 and higher.
Important
Product
SGSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Card Configuration
configure > card card_number
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-card-
slot_number
)#
Syntax Description
service-type { frame-relay | mtp2| multi-service | pwe3-cesopsn | unspecified } [ -noconfirm ]
default service-type [ -noconfirm ]
default service-type [ -noconfirm ]
default
Returns the card configuration to unspecified.
frame-relay
Configures the card to operate in Frame Relay service mode.
mtp2
MTP2 functionality is not yet supported.
Important
Enables MTP2 type service to support narrowband transmissions.
multi-service
Enables path-level service for multiple simultaneous services (such as frame-relay and mtp2) to run over a
single port. For additional information, see the Channelized Port Configuration Mode Commands chapter
single port. For additional information, see the Channelized Port Configuration Mode Commands chapter
Command Line Interface Reference, Modes C - D, StarOS Release 19
322
Card Configuration Mode Commands
service-type