для Cisco Cisco Packet Data Gateway (PDG)

policy sctp-down

Configures how the MME responds to a failure of the Stream Control Transmission Protocol (SCTP) connection
from the eNodeB.

Product

MME

Privilege

Administrator

Command Modes

Exec > Global Configuration > Context Configuration > MME Service

configure > context context_name > mme-service service_name

Entering the above command sequence results in the following prompt:

[

context_name

]

host_name

(config-mme-service)#

Syntax Description

policy sctp-down { detach-ue | idle-mode-entry }
default policy sctp-down

default

Returns the command to its default setting of idle-mode-entry.

detach-ue

detach-ue: Specifies that UEs are to be detached from the service when the SCTP connection from the eNodeB
fails.

idle-mode-entry

idle-mode-entry: Specifies that UEs are to be placed into an idle mode condition when the SCTP connection
from the eNodeB fails.

Usage Guidelines

Use this command to configure how the MME reacts to an SCTP connection failure condition.

Examples

The following command configures the MME to place UEs into an idle state while the SCTP connection from
the eNodeB fails:
policy sctp-down idle-mode-entry

Command Line Interface Reference, Modes I - Q, StarOS Release 19

977

MME Service Configuration Mode Commands

policy sctp-down