для Cisco Cisco Packet Data Gateway (PDG)
server
Configures the IPMS server address and ports on which the IPMS client on an IPMS-enabled AGW
communicates. This is the IP address and port range of the IPMS server.
communicates. This is the IP address and port range of the IPMS server.
Product
IPMS
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > IPMS Configuration
configure > context context_name > ipms
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-ctx-ipms)#
Syntax Description
server address ip_address
[
seconary
] [
start-port start_port
[
end-port end_port
]][
secondary
]
no server address ip_address
no
Removes the configured IPMS server IP address and port range from this context.
address ip_address
Specifies the IP address of the IPMS server to which the IPMS client service communicates in IPv4
dotted-decimal notation.
dotted-decimal notation.
A maximum of 4 IPMS severs can be configured with this command in one context.
[ start-port start_port[ end-port end_port ]]
Default: 45001 source port
45005 end port
Specifies the range of UDP ports on which IPMS client communicates with the IPMS server.
start-port start_port: Specifies starting port number as an integer from 1 through 65535 that is less than
end_port, if end-port is specified.
end_port, if end-port is specified.
end-port end_port: Specifies is the end port number as an integer from 1 through 65535 that is more than
start_port.
start_port.
Command Line Interface Reference, Modes I - Q, StarOS Release 19
75
IPMS Client Configuration Mode Commands
server