для Cisco Cisco Packet Data Gateway (PDG)
usage-monitor
This command sets an action to allow operator to stop, reset or start the counting for a PCC-Usage-Monitor
in PCC-Action-Set configuration for PCC-Service instance.
in PCC-Action-Set configuration for PCC-Service instance.
Product
IPCF
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > PCC Service Configuration > PCC Action-Set
Configuration
Configuration
configure > context context_name > pcc-service service_name > action-set action_set_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-pcc-action-set)#
Syntax Description
[
no
]
usage-monitor usage_mon_name
{
reset-counter
|
start-counter
|
stop-counter
}
no
Removes the action to allow operator to stop, reset or start the counting for a PCC-Usage-Monitor in
PCC-Action-Set configuration for PCC-Service instance.
PCC-Action-Set configuration for PCC-Service instance.
usage_mon_name
Specifies the name of the pre-configured PCC-Usage-Monitor for which counter action is configured under
PCC-Action-Set configuration instance for PCC-Service configuration.
PCC-Action-Set configuration instance for PCC-Service configuration.
usage_mon_name is a pre-configured PCC-Usage-Monitor.
reset-counter
Resets the usage counts for PCC-Usage-Monitor under PCC-Action-Set configuration instance for PCC-Service
configuration.
configuration.
start-counter
Starts the accumulation of usage counts for PCC-Usage-Monitor under PCC-Action-Set configuration instance
for PCC-Service configuration.
for PCC-Service configuration.
Command Line Interface Reference, Modes I - Q, StarOS Release 19
1257
PCC-Action-Set Configuration Mode Commands
usage-monitor