для Cisco Cisco Packet Data Gateway (PDG)

Скачать
Страница из 1868
bind
Binds the service IP address to a crypto template and configures the number of sessions the PDIF can support.
Product
PDIF
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > PDIF Service Configuration
configure > context context_name > pdif-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-pdif-service)#
Syntax Description
bind address address { crypto-template string } [ max-sessions number ]
no bind
no
Removes a previously configured binding.
address
Specifies the IP address of the service.
crypto-template string
Specifies the name of the crypto template to be bound to the service as an alphanumeric string of 0 through
127 characters.
max-sessions number
Specifies the maximum number of sessions to be supported by the service as an integer from 0 to 3000000.
Default: 3000000
If the max-sessions value is changed on an existing system, the new value takes effect immediately if it is
higher than the current value. If the new value is lower than the current value, existing sessions remain
established, but no new sessions are permitted until usage falls below the newly-configured value.
Usage Guidelines
Binds the IP address used as the connection point for establishing the IKEv2 sessions to the crypto template.
It can also define the number of sessions the PDIF can support.
   Command Line Interface Reference, Modes I - Q, StarOS Release 19
1492
PDIF Service Configuration Mode Commands
bind