для Cisco Cisco Packet Data Gateway (PDG)

Скачать
Страница из 1868
ip-header-dscp value
 { all-control-packets | setup-packets-only }
Default: Disabled
Used to configure the QoS Differentiated Services Code Point (DSCP) marking for GRE packets.
• value : Represents the DSCP setting. It represents the first six most-significant bits of the ToS field. It
can be configured to any hex value from 0x0 through 0x3F.
• all-control-packets : Dictates that the DSCP marking is to be provided in all GRE control packets.
• setup-packets-only : Dictates that the DSCP marking is to be provided only in GRE setup packets.
protocol-type
 { any | byte-stream | ppp }
Specifies the protocol used fro GRE encapsulation that is acceptable to
any: Specifies that the PDSN service will accept GRE packets encapsulated using any protocol.
byte-stream: Specifies that the PDSN service will accept GRE packets only encapsulated using byte stream.
Using byte stream encapsulation, PPP packets are framed at different intervals and sent.
ppp: Specifies that the PDSN service will accept GRE packets only encapsulated using the Point-to-Point
Protocol (PPP). Using PPP encapsulation, PPP packets are framed at regular intervals and sent.
reorder-timeout
Default100
Configures max number of milliseconds to wait before processing reordered out-of-sequence GRE packets.
milliseconds must be an integer from through 5000.
segmentation
Default: disabled
Enables GRE Segmentation for the PDSN service.
sequence-mode
 {  none | reorder }
Default: none
Configures handling of incoming out-of-sequence GRE packets.
none: Specifies that sequence numbers in packets are ignored and all arriving packets are processed in the
order they arrive.
reorder: Specifies that out of sequence packets are stored in a sequencing queue until one of the conditions
is met:
• The reorder timeout occurs: All queued packets are sent for processing and the accepted sequence number
is updated to the highest number in the queue.
• The queue is full (five packets): All packets in the queue are sent for processing, the reorder timer is
stopped and the accepted sequence number is updated to the highest number in the queue.
• An arriving packet has a sequence number such that the difference between this and the packet at the
head of the queue is greater than five. All the packets in the queue are sent for processing, the reorder
timer is stopped and the accepted sequence number is updated to the highest number that arrived.
Command Line Interface Reference, Modes I - Q, StarOS Release 19    
1561
PDSN Service Configuration Mode Commands
gre