для Cisco Cisco Packet Data Gateway (PDG)
registration-update
Configures registration update related parameters for the PDSN.
Product
PDSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > PDSN Service Configuration
configure > context context_name > pdsn-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-pdsn-service)#
Syntax Description
registration-update
{
pdsn-code-nvse
|
wait-timeout secs }
[
default
|
no
]
registration-update
{
pdsn-code-nvse
|
wait-timeout }
no
If this option is used with the pdsn-code-nvse keyword, then pdsn-code-nvse configuration is disabled.
If this option is used with the wait-timeout keyword, a separate A11 timer is not used. The PDSN waits for
the ppp retransmit-timeout and then sends the A11 Update. If a value is provided, then the "ppp
retransmit-timeout" is ignored and a separate A11 timeout is started immediately upon sending the LCP
Term-Ack. The A11 Update is then sent when the timer expires.
the ppp retransmit-timeout and then sends the A11 Update. If a value is provided, then the "ppp
retransmit-timeout" is ignored and a separate A11 timeout is started immediately upon sending the LCP
Term-Ack. The A11 Update is then sent when the timer expires.
A value of 0 sends the A11 Update immediately after sending the LCP Term-Ack.
default
Sets/Restores default value assigned for registration-update { pdsn-code-nvse | wait-timeout }
pdsn-code-nvse
Adds the PDSN code NVSE in all A11 registration update messages.
secs
The number of seconds to wait. secs must be an integer in the range from 0 through 16.
Command Line Interface Reference, Modes I - Q, StarOS Release 19
1603
PDSN Service Configuration Mode Commands
registration-update