для Cisco Cisco Packet Data Gateway (PDG)
overlapping-ip-address
This command allows you to enable or disable overlapping of IP addresses which enables multiple users to
use the same IP address.
use the same IP address.
Product
IPSG
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > IPSG RADIUS Server Configuration
configure > context context_name > ipsg-service service_name mode radius-server
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-ipsg-service-radius-server)#
Syntax Description
[ default | no ] overlapping-ip-address
default
If previously configured, disables IPSG support of overlapping IP addresses.
Using overlapping IP addresses is disabled by default.
no
If previously configured, disables IPSG support of overlapping IP addresses.
Usage Guidelines
Use this command to enable or disable overlapping IP addresses for subscribers on different networks that
are independent of each other.
are independent of each other.
Examples
The following command enables IPSG overlapping of IP addresses:
overlapping-ip-address
overlapping-ip-address
Command Line Interface Reference, Modes I - Q, StarOS Release 19
136
IPSG RADIUS Server Configuration Mode Commands
overlapping-ip-address