для Cisco Cisco Packet Data Gateway (PDG)
dead-interval
Configures the retry time to connect to the remote system for the IP Pool Sharing Protocol.
Product
PDSN
HA
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > Ethernet Interface Configuration > IP Pool Sharing
Protocol Configuration
Protocol Configuration
configure > context context_name > interface interface_name broadcast > pool-share-protocol { primary
ip_address | secondary ip_address }
ip_address | secondary ip_address }
Syntax Description
dead-interval seconds
[ no | default ] dead-interval
[ no | default ] dead-interval
no
Disables the dead interval. On loss of connectivity to the remote system, no retries are attempted and the
remote system is marked dead immediately on failure.
remote system is marked dead immediately on failure.
default
Resets the dead interval to the default of 3600 seconds.
seconds
Default: 3600 seconds
The amount of time in seconds to wait before retrying the remote system. seconds must be an integer from
25 through 259200.
25 through 259200.
Usage Guidelines
Use this command to set the amount of time to wait before retrying to connect with the remote system for the
IP pool sharing protocol.
IP pool sharing protocol.
Examples
Use the following command to set the interval to 180 seconds (3 minutes):
dead-interval 180
Command Line Interface Reference, Modes I - Q, StarOS Release 19
154
IPSP Configuration Mode Commands
dead-interval