для Cisco Cisco Packet Data Gateway (PDG)
allow
This command configure the system to allow different attributes in the LAC Hostname Attribute Value Pair
(AVP) and Called-Number AVP for L2TP messages exchanged between LAC and LNS.
(AVP) and Called-Number AVP for L2TP messages exchanged between LAC and LNS.
Product
GGSN
PDSN
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > LAC Service Configuration
configure > context context_name > lac-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-lac-service)#
Syntax Description
allow { aaa-assigned-hostname | called-number value apn | calling-number value imsi }
default allow { aaa-assigned-hostname | called-number value apn }
no allow { aaa-assigned-hostname | called-number value apn | calling-number }
default allow { aaa-assigned-hostname | called-number value apn }
no allow { aaa-assigned-hostname | called-number value apn | calling-number }
no
Disable the configured attribute and returns to the behavior that uses the LAC-Service name as the HostName
AVP.
AVP.
aaa-assigned-hostname
When enabled if AAA assigns a valid Tunnel-Client-Auth-ID attribute for the tunnel, it is used as the HostName
AVP in the L2TP tunnel setup message.
AVP in the L2TP tunnel setup message.
This keyword works in conjunction with the local-hostname hostname keyword applied via the tunnel l2tp
command in APN Configuration mode.
command in APN Configuration mode.
When Tunnel parameters are not received from the RADIUS Server, Tunnel parameters configured in an
APN are considered for the LNS peer selection. When APN configuration is selected, the local-hostname
configured with the tunnel l2tp command in the APN for the LNS peer will be used as an LAC Hostname.
APN are considered for the LNS peer selection. When APN configuration is selected, the local-hostname
configured with the tunnel l2tp command in the APN for the LNS peer will be used as an LAC Hostname.
Command Line Interface Reference, Modes I - Q, StarOS Release 19
371
LAC Service Configuration Mode Commands
allow