для Cisco Cisco Packet Data Gateway (PDG)
renew-percent-time
Configures percentage of lifetime at which a registration renewal is sent to the Local Mobility Anchor (LMA).
Product
HSGW
S-GW
SaMOG
Privilege
Administrator
Command Modes
Exec > Global Configuration > Context Configuration > MAG Service Configuration
configure > context context_name > mag-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-mag-service)#
Syntax Description
renew-percent-time percent
default renew-percent-time
default renew-percent-time
default
Resets the command to the default value of 75.
percent
Default: 75
Specifies the time percentage when the registration renewal is sent to the LMA. percent is a percentage value
of the registration lifetime expressed as an integer from 1 through 100.
of the registration lifetime expressed as an integer from 1 through 100.
Usage Guidelines
Use this command to specify when a registration renewal is sent to the LMA for subscribers using this service.
If the registration lifetime is 600 seconds (10 minutes) and this command is set to 75 (percent), then the
registration renewal message is sent after 450 seconds of the registration lifetime has expired.
registration renewal message is sent after 450 seconds of the registration lifetime has expired.
Examples
The following command sets the registration renewal time for subscribers using this service to 90 percent of
the registration lifetime:
renew-percent-time 90
the registration lifetime:
renew-percent-time 90
Command Line Interface Reference, Modes I - Q, StarOS Release 19
745
MAG Service Configuration Mode Commands
renew-percent-time