для Cisco Cisco Packet Data Gateway (PDG)
plmn-id
Associates a Public Land Mobile Network (PLMN) identifier with a Mobile Switching Center (MSC) pool
area.
area.
Product
MME
Privilege
Administrator
Command Modes
Exec > Global Configuration > Context Configuration > MME Service Configuration > Pool Area Configuration
configure > context context_name > mme-service service_name > pool-area pool_area_name type hash-value
or
configure > context context_name > mme-service service_name > pool-area pool_area_name type
round-robin
round-robin
Entering the above command sequences result in the following prompts, respectively:
[
context_name
]
host_name
(config-mme-pool-area-hash-value)#
[
context_name
]
host_name
(config-mme-pool-area-round-robin)#
Syntax Description
plmn-id mcc code mnc code
no plmn-id
no plmn-id
no
Removes the configured plmn-id assigned to this MSC pool area.
mcc code
Specifies the Mobile Country Code for this mobile access network. code must be a three-digit integer from
200 to 999.
200 to 999.
mnc code
Specifies the Mobile Network Code for this mobile access network. code must be a two or three-digit integer
from 00 to 999.
from 00 to 999.
Usage Guidelines
Use this command to associate a PLMN with an MSC pool area. This PLMN is used to select an MSC pool
area based on the target PLMN as specified in the SRVCC handover request.
area based on the target PLMN as specified in the SRVCC handover request.
When configured, the MME attempts to select an MSC using the following selection order:
Command Line Interface Reference, Modes I - Q, StarOS Release 19
824
MME MSC Pool Area Configuration Mode
plmn-id