для Cisco Cisco Packet Data Gateway (PDG)
show ip pool
Displays statistics specific to IP pools.
Product
PDSN
GGSN
HA
ASN-GW
A-BG
Privilege
Security Administrator, Administrator, Operator, Inspector
Command Modes
Exec
The following prompt is displayed in the Exec mode:
[local]
host_name
#
Syntax Description
show ip pool [ address { pool-name pool_name | group-name group_name } { used | free | hold | release
} [ limit limit ] | group-name group_name | groups | hold-timer { imsi imsi | msid msid | username username
} [ limit limit ] | group-name group_name | groups | hold-timer { imsi imsi | msid msid | username username
[ imsi imsi | msid msid ] } | many-to-one | nat-realm | one-to-one | overlap | pool-name pool_name | private
| public | resource | static | summary | verbose | wide ] [ | { grep grep_options
|
more }
address { pool-name pool_name | group-name group_name } { used | free | hold | release} [ limit limit ]
Displays IP pool addresses for the specified IP pool or pool group that are currently in the specified state.
pool-name pool_name: Displays IP addresses from an existing IP pool name specified as an alphanumeric
string of 1 through 31 characters.
string of 1 through 31 characters.
group-name group_name: Displays IP addresses from an existing IP pool group name specified as an
alphanumeric string of 1 through 31 characters.
alphanumeric string of 1 through 31 characters.
used: Displays the IP addresses that are in a used state.
free: Displays the IP addresses that are in a free state.
hold: Displays the IP addresses that are in a hold state.
release: Displays the IP addresses that are in a release state.
limit limit: Specifies the maximum number of address to display as an integer from 1 through 524287.
Command Line Interface Reference, Modes E - F, StarOS Release 19
1202
Exec Mode show Commands (H-L)
show ip pool