для Cisco Cisco Packet Data Gateway (PDG)
show sndcp statistics
Displays statistics for the packet traffic going through the Subnetwork Dependent Convergence Protocol
(SNDCP) layer.
(SNDCP) layer.
Product
SGSN
Privilege
Inspector
Command Modes
Exec
The following prompt is displayed in the Exec mode:
[local]
host_name
#
Syntax Description
show sndcp statistics [ gprs-service srvc_name ] [ verbose ] [ | { grep grep_options | more } ]
gprs-service srvc_name
Displays statistics for an existing GPRS service specified as an alphanumeric string of 1 through 63 characters.
verbose
Displays a more detailed level of statistics.
| { grep grep_options | more }
Pipes (sends) the output of the command to the command specified. You must specify a command to which
the output will be sent.
the output will be sent.
For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section
of the Command Line Interface Overview chapter.
of the Command Line Interface Overview chapter.
Usage Guidelines
Use this command to display SNDCP traffic statistics. Include the gprs-service keyword to filter the output
to statistics for only one GPRS service.
to statistics for only one GPRS service.
Examples
Use the following command to display all SNDCP layer traffic statistics:
show sndcp statistics verbose
show sndcp statistics verbose
Use the following command to display SNDCP layer traffic statistics for the test1 GPRS service:
show sndcp statistics gprs-service test1
show sndcp statistics gprs-service test1
Command Line Interface Reference, Modes E - F, StarOS Release 19
1507
Exec Mode show Commands (Q-S)
show sndcp statistics