для Cisco Cisco Packet Data Gateway (PDG)
test ipsec tunnel ip-pool
Tests a specified IPSec tunnel associated with an IP pool name.
Product
All
Privilege
Security Administrator, Administrator, Operator
Command Modes
Exec
The following prompt is displayed in the Exec mode:
[local]
host_name
#
Syntax Description
test ipsec tunnel ip pool pool_name destination-ip ip_address }
pool_name destination-ip ip_address
ip pool pool_name: Specifies the name of an existing IP pool as an alphanumeric string of 1 through 32
characters.
characters.
destination-ip ip_address: Specifies a destination IP address in IPv4 dotted-decimal or IPv6
colon-separated-hexadecimal notation
colon-separated-hexadecimal notation
Usage Guidelines
Use this command to test a specified IPSec tunnel.
The use of test commands could adversely affect the operation of your system. It is recommended that
they only be used under the guidance and supervision of qualified support representative.
they only be used under the guidance and supervision of qualified support representative.
Caution
Examples
The following command test the IPSec tunnel associated with pool3 with a destination IP address of 10.2.3.4:
test ipsec tunnel ip pool pool3 destination-ip 10.2.3.4
test ipsec tunnel ip pool pool3 destination-ip 10.2.3.4
Command Line Interface Reference, Modes E - F, StarOS Release 19
716
Exec Mode Commands (T-Z)
test ipsec tunnel ip-pool