для Cisco Cisco Tunnel Terminating Gateway (TTG)

Use with caution. Flood ping terminates after receiving (count) responses. If flood ping is used against
an interface that is not responding, it will run indefinitely

Important

interface interface_name

Defines a named source interface from which ping packets will originate. interface_name is an alphanumeric
string of 1 to 79 characters.

pattern val

Specifies the hexadecimal pattern to fill ICMP packets as a hexadecimal number from 0x0 through 0ffff

size val

Specifies the size of ICMP datagram (in bytes) as an integer from 40 through 18432. Default: 56.

src ip_address

Specifies the source IP address in IPv4 dotted-decimal or IPv6 colon-separated-hexadecimal notation. Default:
originating system's IP address

vrf name

Specifies the name of an existing VFR as an alphanumeric string of 1 through 63 characters.

Usage Guidelines

This command is useful in verifying network routing and if a remote node is able to respond at the IPv6 layer.

Examples

Use this command to ping the IPv6 address 2001:0db8:85a3:0000:0000:8a2e:0370:7334
ping6 2001:0db8:85a3:0000:0000:8a2e:0370:7334

Command Line Interface Reference, Modes E - F, StarOS Release 19

624

Exec Mode Commands (D-S)

ping6