для Cisco Cisco Tunnel Terminating Gateway (TTG)
show active-charging flow-mappings
Displays information about all the active flow mappings based on the applied filters.
Product
PSF
NAT
Privilege
Security Administrator, Administrator, Operator, Inspector
Command Modes
Exec
The following prompt is displayed in the Exec mode:
[local]
host_name
#
Syntax Description
show active-charging flow-mappings [ all | call-id call_id | [ nat { not-required | required [ nat-realm
nat_realm_name ] } | trans-proto { tcp | udp } ] + [ | { grep grep_options | more } ]
nat_realm_name ] } | trans-proto { tcp | udp } ] + [ | { grep grep_options | more } ]
all
Displays all the available active-charging flow-mapping information.
call-id call_id
Displays detailed information for a call ID specified as an 8-digit hexadecimal number.
nat { required [ nat-realm string ] not-required }
Displays the active charging flow mappings for which NAT is enabled or disabled.
trans-proto { tcp | udp }
Displays the transport layer.
| { grep grep_options | more }
Pipes (sends) the output of this command to the specified command. You must specify a command to which
the output will be sent.
the output will be sent.
For details on the usage of grep and more, refer to the Regulating a Command's Output section of the Command
Line Interface Overview chapter.
Line Interface Overview chapter.
Usage Guidelines
Use this command to view the Active Charging flow-mapping details.
Command Line Interface Reference, Modes E - F, StarOS Release 19
788
Exec Mode show Commands (A-C)
show active-charging flow-mappings