для Cisco Cisco ASR 5000
APN Configuration Mode Commands
▀ pdp-type
▄ Command Line Interface Reference, StarOS Release 18
1430
pdp-type
Configures the type of PDP contexts that are supported by this APN.
Product
GGSN
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > APN Configuration
configure > context context_name > apn apn_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-apn)#
Syntax
pdp-type { ipv4 [ ipv6 ] | ipv6 [ ipv4 ] | ppp }
default pdp-type
default
Configures the default PDP type, IPv4, for the APN.
ipv4 [ ipv6 ]
Enables support for IPv4 PDP contexts. Also enables support for IPv6 if the IPv6 optional keyword is entered
in this command. Default: Enabled
in this command. Default: Enabled
Important:
Entering both IPv4 and IPv6 in either order enables support for both.
ipv6 [ ipv4 ]
Enables support for IPv6 PDP contexts. Also enables support for IPv4 if the IPv6 optional keyword is entered
in this command. Default: Disabled
in this command. Default: Disabled
Important:
Entering both IPv4 and IPv6 in either order enables support for both.
ppp
Enables support for PPP PDP contexts. Default: Disabled