для Cisco Cisco ASR 5000
Call Control Profile Configuration Mode
▀ authenticate attach
▄ Command Line Interface Reference, StarOS Release 18
1936
attach-type
This keyword configures the Attach authentication based on the type of attach requested. The
attach-type
must be one of the following options:
combined
: Authenticates combined GPRS/IMSI Attaches.
gprs-only
: Authenticates GRPS Attaches only.
frequency frequency
This keyword defines 1-in-N selective authentication for this type of subscriber event - Attach Request. If the
frequency is set for 12, then the service skips authentication for the first 11 events and authenticates on the
twelfth event.
frequency is set for 12, then the service skips authentication for the first 11 events and authenticates on the
twelfth event.
frequency
must be an integer from 1 to 16.
inter-rat
Enables/disables authentication for Inter-RAT Attaches.
periodicity
duration
The periodicity configured specifies authentication periodicity. For example, if the configured periodicity is
“20” minutes, the UE is authenticated at every “20” minutes.
The
“20” minutes, the UE is authenticated at every “20” minutes.
The
duration
is an integer with a range “1” up to “10800” minutes.
Usage
Authentication for Attach is disabled by default. This command enables/disables authentication for an Attach
with a local P-TMSI or Attaches with an IMSI, which will be authenticated to acquire the CK (cipher key)
and the IK (integrity key).
with a local P-TMSI or Attaches with an IMSI, which will be authenticated to acquire the CK (cipher key)
and the IK (integrity key).
Example
The following command configures authentication to occur after every tenth attach event for GPRS access.
authenticate attach frequency 10 access-type gprs
The following command disables authentication for Inter-RAT Attaches, use:
no authenticate attach inter-rat