для Cisco Cisco ASR 5000
Call Control Profile Configuration Mode
▀ local-cause-code-mapping gw-unreachable
▄ Command Line Interface Reference, StarOS Release 18
2012
local-cause-code-mapping gw-unreachable
Configures the reject cause code to send to a UE when a gateway (S-GW or P-GW) does not respond during an EMM
procedure.
procedure.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
local-cause-code-mapping gw-unreachable emm-cause-code { eps-service-not-allowed-in-this-
plmn | network-failure | no-suitable-cell-in-tracking-area | plmn-not-allowed | roaming-
not-allowed-in-this-tracking-area | tracking-area-not-allowed } [ attach [ tau ] | tau [
attach ] ] | { no-bearers-active tau }
plmn | network-failure | no-suitable-cell-in-tracking-area | plmn-not-allowed | roaming-
not-allowed-in-this-tracking-area | tracking-area-not-allowed } [ attach [ tau ] | tau [
attach ] ] | { no-bearers-active tau }
remove local-cause-code-mapping gw-unreachable [ attach | tau ]
remove local-cause-code-mapping gw-unreachable [ attach | tau ]
Removes the configured cause code mapping.
gw-unreachable emm-cause-code { eps-service-not-allowed-in-this-plmn | network-
failure | no-suitable-cell-in-tracking-area | plmn-not-allowed | roaming-not-
allowed-in-this-tracking-area | tracking-area-not-allowed }
failure | no-suitable-cell-in-tracking-area | plmn-not-allowed | roaming-not-
allowed-in-this-tracking-area | tracking-area-not-allowed }
Specifies the EPS Mobility Management (EMM) cause code to return when a gateway does not respond.
eps-service-not-allowed-in-this-plmn
network-failure
no-bearers-active
no-suitable-cell-in-tracking-area
plmn-not-allowed
roaming-not-allowed-in-this-tracking-area
tracking-area-not-allowed
[ attach [ tau ] | tau [ attach ] ] | { no-bearers-active tau }
Optionally, the MME can return separate cause codes for Attach procedures and TAU procedures. This
capability is available for any of the above EMM cause codes except
capability is available for any of the above EMM cause codes except
no-bearers-active
, which can only
be defined for TAU procedures.