для Cisco Cisco ASR 5000
AAA Server Group Configuration Mode Commands
▀ radius charging server
▄ Command Line Interface Reference, StarOS Release 18
206
oldports
Sets the UDP communication port to the old default for RADIUS communications to 1645.
port port_number
Specifies the port number to use for communications.
port_number
must be an integer from 1 through 65535.
Default: 1812
priority priority
Specifies the relative priority of this accounting server. The priority is used in server selection for
determining which server to send accounting data to.
determining which server to send accounting data to.
priority
must be an integer from 1 through 1000, where 1 is the highest priority.
Default: 1000
admin-status { enable | disable }
Enables or disables the RADIUS authentication, accounting, or charging server functionality and saves the
status setting in the configuration file to re-establish the set status at reboot.
status setting in the configuration file to re-establish the set status at reboot.
-noconfirm
Specifies that the command must execute without any prompts and confirmation from the user.
Usage
This command is used to configure the RADIUS charging server(s) with which the system is to communicate
for ACS Prepaid Authentication requests.
Up to 128 AAA servers can be configured per context when the system is functioning as a PDSN and/or HA.
Up to 16 servers are supported per context when the system is functioning as a GGSN.
for ACS Prepaid Authentication requests.
Up to 128 AAA servers can be configured per context when the system is functioning as a PDSN and/or HA.
Up to 16 servers are supported per context when the system is functioning as a GGSN.
Example
The following commands configure RADIUS charging server with the IP address set to 10.2.3.4, port to
1024, priority to 10:
1024, priority to 10:
radius charging server 10.2.3.4 key sharedKey212 port 1024 max 127
radius charging server 10.2.3.4 encrypted key scrambledKey234 oldports
priority 10
priority 10