для Cisco Cisco ASR 5000
Call-Home Configuration Mode
contact-email-addr ▀
Command Line Interface Reference, StarOS Release 18 ▄
2133
contact-email-addr
Sets the e-mail address of the person identified as the prime contact for this system.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Call-Home Configuration
configure > call-home
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-home)#
Syntax
[ no ] contact-email-addr email_addr
no
Removes the contact e-mail address.
contact-email-addr
email_addr
Specifies the information for prime contact as an alphanumeric string in the format
local-part@domain
,
where domain can be made up of a number of labels, each separated by a period and between 1 and 63
characters in length. The local-part can be 1-64 characters. The domain-label can be 1-63 characters. The
domain can be 1 through 135 characters. The entire alphanumeric string can be a no larger than 200
characters.
characters in length. The local-part can be 1-64 characters. The domain-label can be 1-63 characters. The
domain can be 1 through 135 characters. The entire alphanumeric string can be a no larger than 200
characters.
Usage
Use this command to set up the e-mail address for the person identified as the contact person for this device.
Important:
You can enter any valid e-mail address. You cannot use spaces.
Example
The following command specifies e-mail address for the entity
notity.TAC@NOCservices.net
:
contact-email-addr notity.TAC@NOCservices.net