для Cisco Cisco ASR 5000
Credit Control Configuration Mode Commands
app-level-retransmission ▀
Command Line Interface Reference, StarOS Release 18 ▄
2815
app-level-retransmission
This command enables/disables application-level retransmissions with the “T” bit set.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > ACS Configuration > Credit Control Configuration
active-charging service service_name > credit-control
Entering the above command sequence results in the following prompt:
[local]host_name(config-dcca)#
Syntax
app-level-retransmission { set-retransmission-bit | unset-retransmission-bit }
default app-level-retransmission
default
Configures this command with the default setting.
Default:
Default:
unset-retransmission-bit
set-retransmission-bit
Sets the retransmission bit.
unset-retransmission-bit
Unsets the retransmission bit.
Usage
Use this command to enable application-level transmission with “T” bit set.
'T' bit setting is done only for DIABASE protocol-based rerouting and not for application-based
retransmissions. In order to identify such retransmissions, the server expects the T bit to be set at all levels
(both DIABASE and application) of retransmission, which can be achieved with this CLI command.
'T' bit setting is done only for DIABASE protocol-based rerouting and not for application-based
retransmissions. In order to identify such retransmissions, the server expects the T bit to be set at all levels
(both DIABASE and application) of retransmission, which can be achieved with this CLI command.
Example
The following command specifies to set retransmission bit:
app-level-retransmission set-retransmission-bit