для Cisco Cisco ASR 5000
GTP-U Service Configuration Mode Commands
retransmission-timeout ▀
Command Line Interface Reference, StarOS Release 18 ▄
6227
retransmission-timeout
Configures retransmission timeout for GTPU echo message retransmissions for this service.
Important:
In release 14.0 and later versions, this command is replaced by the
echo-retransmission-
timeout
command.
Product
ePDG
GGSN
P-GW
SAEGW
S-GW
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > GTP-U Service Configuration
configure > context context_name > gtpu-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-gtpu-service)#
Syntax
retransmission-timeout seconds
default retransmission-timeout
default
Returns the command to its default setting of 5.
seconds
Default: 5
Specifies the number of seconds between the re-sending of GTP-U echo messages.
Specifies the number of seconds between the re-sending of GTP-U echo messages.
seconds
must be an
integer from 1 through 20.
Usage
Use this command to set the number of seconds between the retransmission of GTP-U echo messages.
Example
The following command sets the number of seconds between the sending of GTP-U echo messages to
7
:
retransmission-timeout 7