для Cisco Cisco ASR 5000
LNS Service Configuration Mode Commands
▀ peer-lac
▄ Command Line Interface Reference, StarOS Release 18
7008
description
text
Specifies the descriptive text to use to describe the specified peer LAC.
text
must be an alphanumeric string
of 0 through 79 characters.
Usage
Use this command to add a peer LAC address for the current LNS service.
Specific peer LACs can be configured by specifying their individual IP addresses. In addition, to simplify
configuration, communication with a group of peer LACs can be enabled by specifying a network prefix and
a mask.
Specific peer LACs can be configured by specifying their individual IP addresses. In addition, to simplify
configuration, communication with a group of peer LACs can be enabled by specifying a network prefix and
a mask.
Example
The following command adds a peer LAC to the current LNS service with the IP address of
10.10.10.100
,
and specifies the shared secret to be
1b34nnf5d
:
peer-lac 10.10.10.100 secret 1b34nnf5d
The following command enables communication with up to 16 peer LACs on the 192.168.1.0 network each
having a secret of
having a secret of
abc123
:
peer-lac 92.168.1.0/28 secret abc123
The following command removes the peer LAC with the IP address of
10.10.10.200
for the current LNS
service:
no peer-lac 10.10.10.200