для Cisco Cisco ASR 5000
SGSN PSP Configuration Mode Commands
▀ associate
▄ Command Line Interface Reference, StarOS Release 18
8590
associate
Defines an association between the PSP instance and an application server process (ASP) instance and/or a DSCP
marking template.
marking template.
Product
SGSN
HNB-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > SS7 Routing Domain Configuration > Peer-Server Configuration > PSP Configuration
configure > ss7-routing-domain routing_domain_id variant variant_type > peer-server id id
> psp instance psp_instance
> psp instance psp_instance
Entering the above command sequence results in the following prompt:
[local]host_name(config-ss7-rd-ss7rd_id-ps-peer-server_id-psp-psp_instance)#
Syntax
associate { asp instance asp_num | dscp-template downlink template_name }
no associate [ asp | dscp-template downlink ]
no
Removes the association, between the PSP and the ASP or the DSCP marking template, from the routing
domain configuration.
domain configuration.
Important:
Using the
no associate
command will most likely result in the termination of all current
subscriber sessions active through the peer-server.
asp instance asp_num
Identifies a specific ASP configuration. Up to four ASP instances can be configured for a single SS7 routing
domain.
domain.
asp_num
is a digit from 1 to 4.
dscp-marking downlink template_name
Identifies a specific DSCP marking template to associate with this PSP configuration.
template_name
is a string of 1 to 64 characters, including letters, digits, dots (.), dashes (-), and forward
slashes (/), to identify a unique instance of a DSCP template. For more information about DSCP marking
templates, refer to the DSCP Template Configuration Commands Mode chapter.
The DSCP marking template provides a mechanism enabling the SGSN to perform differentiated services
code point (DSCP) marking of control packets and signaling messages at the SGSN’s M3UA level on the Gb
interface. This DSCP marking feature enables the SGSN to perform classifying and managing of network
traffic and to determine quality of service (QoS) for the interfaces to an IP network
While enabling DSCP marking of SCTP (control packets) on HNB-GW only
templates, refer to the DSCP Template Configuration Commands Mode chapter.
The DSCP marking template provides a mechanism enabling the SGSN to perform differentiated services
code point (DSCP) marking of control packets and signaling messages at the SGSN’s M3UA level on the Gb
interface. This DSCP marking feature enables the SGSN to perform classifying and managing of network
traffic and to determine quality of service (QoS) for the interfaces to an IP network
While enabling DSCP marking of SCTP (control packets) on HNB-GW only
associate dscp-template
downlink template_name
command is applicable. This command is used to provides a mechanism